Cable Tray

Perforated Type Cable Tray are used in low voltage, telecommunication and fiber optic cables.  They are one piece sections with Slotted perforations spread across in an uniform fashion.

 

Various widths  from 50,100,150,200,250,300,400,500,600,750and1000mm.

Materials used : MS / STAINLESS STEEL / ALUMINUM.

 

Standard Thickness :- 1.2 mm / 1.6 mm / 2.0 / 2.5 / 3.0 mm

 

 

Standard depths of 25,50,75 and 100mm.

 

Standard length of 2500mm.

In the electrical wiring of buildings, a Cable Tray is used to support insulated electrical cables used for power distribution, control and communication.

Stainless Steel Cable Tray
In the electrical wiring of buildings, a Cable Tray is used to support insulated electrical cables used for power distribution, control and communication.

Ladder Type Cable Tray offer side rail protection with Intermediate members called as rungs laid out at specific uniform distances and are made in a wide selection of materials and finishes. Side Rails and the intermediate rails are joined together either by welding or with the help of fasteners.

 

Various widths of 100, 150, 300, 450, 500, 600, 750, 900, 1000 and 1250mm can be manufactured.

 

Standard Heights of 50, 75 and 100mm.

 

Materials used : MS / STAINLESS STEEL / ALUMINUM.

 

Standard Thickness :- 1.2 mm / 1.6 mm / 2.0 / 2.5 / 3.0 mm

 

Standard lengths of 2500mm.

 

Rung spacing of 250mm.

 

Uses: Ladder cable tray is generally used in applications with intermediate to long support spans.

Ladder Type Cable Tray offer side rail protection with Intermediate members called as rungs laid out at specific uniform distances and are made in a wide selection of materials and finishes. Side Rails and the intermediate rails are joined together either by welding or with the help of fasteners.

 

Various widths of 100, 150, 300, 450, 500, 600, 750, 900, 1000 and 1250mm can be manufactured.

 

Standard Heights of 50, 75 and 100mm.

 

Materials used : MS / STAINLESS STEEL / ALUMINUM.

 

Standard Thickness :- 1.2 mm / 1.6 mm / 2.0 / 2.5 / 3.0 mm

 

Standard lengths of 2500mm.

 

Rung spacing of 250mm.

 

Uses: Ladder cable tray is generally used in applications with intermediate to long support spans.

 

Cable Tray Cross / Tees / Elbow / Risers & other Accessories are used along with Straight Sections to Channel cables in various directions in in the horizontal or vertical planes.

Each of these fittings is available in various radii and bends angles, materials, thickness & finish

In the electrical wiring of buildings, a Cable Tray is used to support insulated electrical cables used for power distribution, control and communication.

With the support of our professional, we are offering a wide array of Cable Tray Bend to our customers.

In the electrical wiring of buildings, a Cable Tray is used to support insulated electrical cables used for power distribution, control and communication.

These trays are fabricated from M.S sheets or PreGalvanized sheets. Perforated is done on the top of the trays, for ventilation and to tie the cables. various widths are available in standard lengths. The raw materials are procured from the reputed and authorised steel plants like JSW,POSCO,TATA and ESSAR steels., giving the highest priority in finishing and smoothness of cable trays ascertaining the safety of the cables run on it.

PreGalvanized trays are straight away used after fabrication ,No finishing is done on it . Ms trays are treated with enamel paint or powder coated painting or hot dip galvanizing.

These trays are fabricated from M.S sheets or PreGalvanized sheets. Perforated is done on the top of the trays, for ventilation and to tie the cables. various widths are available in standard lengths. The raw materials are procured from the reputed and authorised steel plants like JSW,POSCO,TATA and ESSAR steels., giving the highest priority in finishing and smoothness of cable trays ascertaining the safety of the cables run on it.

PreGalvanized trays are straight away used after fabrication ,No finishing is done on it . Ms trays are treated with enamel paint or powder coated painting or hot dip galvanizing.

These trays are fabricated from M.S sheets or PreGalvanized sheets. Perforated is done on the top of the trays, for ventilation and to tie the cables. various widths are available in standard lengths. The raw materials are procured from the reputed and authorised steel plants like JSW,POSCO,TATA and ESSAR steels., giving the highest priority in finishing and smoothness of cable trays ascertaining the safety of the cables run on it.

PreGalvanized trays are straight away used after fabrication ,No finishing is done on it . Ms trays are treated with enamel paint or powder coated painting or hot dip galvanizing.

Ladder type of cable trays are used for distributing heavy duty cables, This may be economical to perforated cable trays with desirable features. The loading capacity is more , the strength of the cable trays can be tuned as per requirements.

As perforated trays ladder trays also are fabricated from M.S sheets with different finishing and PreGalvanized sheets for direct & immediate installation. The best advantage of ladder type cable trays are that moisture can’t accumulate on them.

Ladder type of cable trays are used for distributing heavy duty cables, This may be economical to perforated cable trays with desirable features. The loading capacity is more , the strength of the cable trays can be tuned as per requirements.

As perforated trays ladder trays also are fabricated from M.S sheets with different finishing and PreGalvanized sheets for direct & immediate installation. The best advantage of ladder type cable trays are that moisture can’t accumulate on them.